Yamaha YS100

High-speed mounting capacity handling 25,000CPH +/-50μm(CHIP), +/-30μm(QFP)mounting absolute accuracy in full time operation

Handles a wide range

  • High-speed mounting capacity handling 25,000CPH(0.14sec/CHIP Equivalent : optimum condition)
  • +/-50μm(CHIP), +/-30μm(QFP)mounting absolute accuracy in full time operation
  • Handles a wide range of components from 0402 chips to W45xL100mm or less components and with long connectors
  • Capable of handling 15mm height components
  • Applicable to large size PCB(L510mm x W460mm)
  • Built-in tape cutter available as an option
  • Conformity with both Machinery directive and EMC directive (CE marking)
  • Model YS100(Model : KJJ-000)
    Applicable PCB L510 x W460mm to L50 x W50mm (Note 1)(Note 2)
    Through-put (Optimum) 25,000CPH(0.14sec/CHIP Equivalent)
    Mounting accuracy
    (Yamaha’s standard components)
    Absolute accuracy(μ+3σ):+/-0.05mm/CHIP, +/-0.05mm/QFP
    Repeatability(3σ):+/-0.03mm/CHIP, +/-0.03mm/QFP
    Applicable components 0402(Metric base to □45mm components, SOP/SOJ, QFP,connector, PLCC, CSP/BGA, Long connector(W45×L100mm or less) (Note 3)(Note 4)
    Height of components which can be mounted : 15mm or less(Note 5)
    Number of component types 96 types(Max, 8mm tape reel conversion)(Note 1)
    Power supply 3-Phase AC 200/208/220/240/380/400/416V +/-10% 50/60Hz
    Air supply source 0.45MPa or more, in clean, dry states
    External dimension
    (Note 6)
    L1,665xW1,562(End of cover)xH1,445mm(cover top)
    L1,665xW1,615(End of guide for feeder carriage)xH1,445m(cover top)
    Weight Approx. 1,630kg(Main unit only)

    (Note 1)It is varied by the combination layout together with sATS / dYTF etc.
    (Note 2)For information on “2 stages push-up spec.”, please consult us separately.
    (Note 3)In case of FNC head type, the applicable components range is □31mm or less Components.
    (Note 4)When handling long connectors and large sized components, about the eccentric offset values and the rotation angle, please consult us separately.
    (Note 5)4mm or less height of upper face of PCB before transport is required for the FNC head type.
    (Note 6)This dimension does not include the projection.

    Skip to content